Tips for removing burrs on metal stamping parts

Presumably, in the production process, stamping parts manufacturers sometimes find that metal stamping parts have different degrees of burr problems, which affect the quality and life of the finished stamping parts. Do you know how to solve this burr problem? Let the sophisticated author tell you some tips. 1. Use tools to remove burrs on metal stamping (1) Outer diameter: use a lathe to guide the angle during the metal stamping process. (2) Edge: Use files, whetstone, sandpaper, whetstone. (3) Welding slag: Vibrating welding slag removal tools can also remove brittle burrs. (4) Hole: Use a chamfering knife or the front end of a drill with a larger diameter to remove burrs from the holes of the metal stamping parts. 2. Manual removal of burrs on metal stamping parts (1) Electrochemical deburring: If self-made equipment, the cost is not high, economical and high-efficiency. (2) Heat-treated parts can also be deburred by shot blasting, and surface stress can also be eliminated. (3) Equipped with various shapes of gun heads with air guns, the deburring effect is better and the efficiency is high. (4) Vibration grinding to remove burrs (gear burrs), with high efficiency and good quality. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)