Use of various continuous die strip materials

1. Single-sided tape type 　　 is widely used in connector terminals and smaller stamping parts. 2. The double-sided belt material type is mainly suitable for the larger stamping parts that have more complicated features, higher bending height, wider material width, and easy to deform during the belt conveying process, and cannot be conveyed by single-sided belt , You can choose the double-sided tape type. 3. Double material belt type The double material belt type is mainly derived from the double-sided material belt type, and the purpose is also to save material design. When using double-sided material belt material, two side material belts are required to carry A side-by-side material belt can save material for one material belt. This design can also produce different stamping products, but the stamping products need to have the same quantity required at the same time. This is not the case when arranging the same stamping products.　　4. Double independent material belt type 　　Double independent material belt is generally designed to save materials. Two stamping products are arranged in opposite directions to achieve the purpose of saving materials. It is also possible to stamp two different stamping products on each side at the same time. For example, when stamping different products, the stamping products must have the same number of requirements. This is not the case when arranging the same stamping products. 5. The intermediate strip type is mainly suitable for products with lower size requirements and lower stamping accuracy. The use of this design method can generally increase the material utilization rate, but the relative stamping accuracy and stamping speed are relatively poor, and it is generally not recommended to use this Kind of pattern design.