What are the advantages and uses of hardware shrapnel?

Metal shrapnel is widely used in machinery manufacturing, electrical appliances, electronics, auto parts, and high-paying product parts because of its special characteristics in the metal stamping industry. Where are the advantages and uses of hardware shrapnel? (1) It can control mechanical movement, such as valve shrapnel in internal combustion engine and control shrapnel in clutch. (2) It can store and output energy as power, such as shrapnel in watches and firearms, etc. (3) It can absorb the energy of vibration and impact, such as the buffer shrapnel under the car and train carriage and the vibration-absorbing shrapnel in the coupling, etc. (4) It can be used as a component for measuring force, such as force measuring device and shrapnel in shrapnel scale, etc. The ratio of the load to the deformation of the shrapnel is called the stiffness of the shrapnel. The greater the stiffness, the harder the shrapnel. If according to the nature of the force, the shrapnel can be divided into compact shrapnel and curved spring piece, etc. If it is divided into disc-shaped shrapnel, annular shrapnel, truncated scroll shrapnel and torsion bar shrapnel, etc. according to the shape division. The advantages of metal shrapnel: 1. The processing size range of metal shrapnel is large. Parts with large shapes, such as a small clock stopwatch, to automobile longitudinal beams, covering parts, plus the cold deformation and hardening effect of the stamping materials, have great stamping The strength and stiffness. 2. Metal stamping shrapnel usually has no chips, less material loss, and no other heating and setting equipment. This is a material-saving, energy-saving processing, and low-cost stamping parts. 3. The metal stamping production efficiency is high, and the control is convenient, and the mechanization and automation can be completed at will. This is because the stamping die and stamping equipment depend on the completion of the processing. Normally, the number of strokes per minute is dozens of times, and the high pressure can reach hundreds or even thousands of times per minute. Each stamping stroke will get about one stamping. 4. Metal stamping shrapnel molds, because the size and shape of the metal stamping parts are tight, it usually does not damage the outer quality of the metal shrapnel stamping parts and the mold has a long application life, so the quality of the stamping parts is stable, the interchangeability is good, and the same effect . Dongguan Hardware Co., Ltd., a manufacturer with rich experience, brings you a different and extraordinary manufacturer of hardware shrapnel. We look forward to your choice and win-win cooperation!