What are the advantages of metal stamping parts-hardware

What are the advantages of general metal stamping parts? (Hardware) Metal stamping parts refer to molds for steel/non-ferrous metal plates at room temperature, which are formed into a specified shape by the pressure required for processing by a press. Compared with other methods of mechanical processing and plastic processing, stamping parts processing has many advantages in terms of technology and economy. The main performance is as follows. (1) The production efficiency of metal stamping parts processing is high, and the operation is convenient, and it is easy to realize mechanization and automation. This is because metal stamping parts rely on punching dies and stamping equipment to complete the processing. The number of strokes of ordinary presses can reach dozens of times per minute, and the high-speed pressure can reach hundreds of times per minute or even more than a thousand times per minute. It is possible to get a stamped part from the stamping stroke. (2) Metal stamping parts. Since the mold guarantees the size and shape accuracy of the metal stamping parts, and generally does not damage the surface quality of the stamping parts, and the mold life is generally longer, the quality of the metal stamping parts is stable and the interchangeability is good. It has the characteristics of 'just the same'. (3) Metal stamping parts can be processed into parts with a large size range and more complex shapes, such as stopwatches as small as clocks and clocks, as large as automobile longitudinal beams, covering parts, etc., plus the cold deformation and hardening effect of the material during stamping. Both strength and rigidity are high. (4) Metal stamping parts generally do not generate chips and scraps, consume less material, and do not need other heating equipment, so it is a material-saving and energy-saving processing method, and the cost of stamping parts is lower. Need to know more, welcome to consult: