What are the advantages of stamping parts processing

Stamping parts are usually used in priority areas of metal processing and mechanical manufacturing. Stamping processing is a processing method that uses molds to separate or shape metal strips, and its application range is very wide. Stamping parts are mainly made of hot-rolled or cold-rolled thin metal lath materials, such as carbon steel plates, alloy steel plates, spring steel plates, galvanized plates, tinplate, stainless steel plates, copper and copper alloy plates, aluminum and aluminum alloy plates, etc. The dies used for stamping parts are called stamping dies. Stamping die is a special tool for batch processing of materials (metal or non-metal) into required stamping parts. Stamping dies are very important in stamping. If there is no stamping die that meets the requirements, it is difficult to stamp in batches; if the stamping dies of the predecessors are not improved, it is impossible to improve their stamping process. Stamping process, dies, stamping equipment, and stamping materials constitute the three elements of the stamping process, and stamping parts can only be obtained by combining them. Compared with other machining and plastic processing methods, metal stamping has many special technical and economic advantages. The main manifestations are as follows: (1) Stamping is generally not as natural as chips, uses less materials, and does not require other heating equipment. It is a material-saving and energy-saving processing method, and the cost of stamping parts is low. (2) When stamping, because the mold ensures the size and shape accuracy of the stamping parts, it generally does not damage the surface quality of the stamping parts. The mold life is generally longer, the stamping quality is not confused, the interchangeability is good, and it has the same characteristics. (3) Parts with a large size range and complex shapes are processed by stamping parts, such as stopwatches, automobile longitudinal beams, cage covers, etc. In addition, due to the cold deformation and hardening of the material during the stamping process, the stamping strength and rigidity are high. (4) The stamping parts have high production efficiency, easy operation, and realize mechanization and automation. This is because stamping relies on stamping dies and stamping equipment to complete processing. The number of strokes of an ordinary press can reach dozens of times per minute, and the high-speed pressure can reach hundreds or even thousands of times per minute. One punch can be obtained for each stroke of stamping. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections