What are the characteristics of the shaping process of stamping processing?

Stamping has many processes, such as punching, bending, stretching, shape correction, etc. This article will introduce the characteristics of one of the shape correction processes. This process is related to the aesthetics, quality and stability of the product, and can make metal The surface of the stamping parts is flat and smooth, so that certain shapes and dimensions of the stamping parts can be trimmed to meet the requirements of the drawings. 1. The amount of deformation is very small, and it is usually formed in a local area to achieve the purpose of trimming, so that the metal stamping parts meet the requirements of the part pattern. 2. After leveling and shaping are required, the error of metal stamping parts is relatively small, so the precision of the mold is relatively high. 3. When the slider of the press reaches the lower pole, a correction force must be applied to the metal stamping parts, and the equipment used must have a certain degree of rigidity. For this type of process, use a fine press as much as possible. If a general mechanical press is used, it must be equipped with a protective device to prevent damage to the equipment. Guangdong stamping parts manufacturers, looking for precision, IATF16949 certified companies, dedicated to precision stamping parts customization services for more than 10 years. Automated production and assembly, high-efficiency mass production, low cost, and punctual delivery. Welcome to inquire about drawings and samples. [Related recommendation] Learn more: Process regulations for stamping blanks Learn more: Phone of precision stamping parts manufacturers Learn more: The significance of improving the process of automotive stamping parts