What are the common processes in metal stamping processing?

What are the common processes in metal stamping processing? At present, metal stamping parts are a processing method with higher production efficiency, less material loss and lower processing cost. It is more suitable for the production of large quantities of metal processing parts, which is convenient for mechanization and automation, has high precision, and is also convenient for post-processing of parts. So what are the common processes in metal stamping processing? Next, metal stamping manufacturers give you an analysis: First, four common processing techniques in metal stamping processing: 1. Punching: the stamping process that separates the sheet metal (including punching, blanking, trimming, cutting, etc.) ). 2. Bending: The stamping process of bending the sheet into a certain angle and shape along the bending line. 3. Deep drawing: a stamping process that transforms the flat sheet into various open hollow parts, or further changes the shape and size of the hollow parts. 4. Partial forming: the stamping process (including flanging, bulging, leveling and shaping processes, etc.) that uses various local deformations of different properties to change the shape of the blank or stamping part. Second, eight characteristics of metal stamping processing technology. 1. Stamping is a processing method with high production efficiency and low material consumption. The stamping process is suitable for the production of larger batches of parts, which is easy to realize mechanization and automation, and has high production efficiency. At the same time, stamping production can not only strive to achieve less waste and no waste production, but also has margins in some cases. The leftover material can also be fully utilized. 2. The operation process is convenient and does not require the operator to have a higher level of skill. 3. The stamped parts generally do not need to be machined, and have high dimensional accuracy. 4. Stamping parts have better interchangeability. Stability of stamping processing is better, the same batch of stamping parts. Can be used interchangeably without affecting assembly and product performance. 5. Since the stamping parts are made of plates, its surface quality is better, which provides convenient conditions for subsequent surface treatment processes (such as electroplating and painting). 6. Stamping processing can obtain parts with high strength, high rigidity and light weight. 7. The cost of stamping parts produced in batches with molds is low. 8. Stamping can produce parts with complex shapes that are difficult to process by other metal processing methods. The common processes of metal stamping processing are summarized here. Stamping processing has high production efficiency, easy operation, easy to realize mechanization and automation, and the cost of stamping parts is lower. I believe that more and more industries will apply. To.