What are the factors that affect the life of molds in stamping parts processing plants-hardware

In the production of stamping parts processing plants, a set of qualified stamping dies plays a key factor. It is about the quality of production, about the stability of production, and about the efficiency of production. So what factors affect the use of stamping dies?　　In actual production, the main factors that affect the work of the mold are the poor surface quality of the stamping material, large tolerances, unstable material properties and impurities on the surface, which will lead to accelerated mold wear. In the drawing die, the most important factors affecting the size of the die punching load and the degree of adhesion tendency are the forming ability, thickness, and surface quality of the material to be drawn. In the production mold, because the integral mold will have concave and convex corners, it will cause the phenomenon of stress concentration and cause the mold to burst. In addition, the shape and fillet radius of the concave and convex mold have a greater impact on the wear of the mold. For example, in the drawing mold with a relatively small fillet radius, the flow resistance of the billet will increase, and the friction will continue to increase. Wear or break the punch. Hardware, 15 years of ingenuity and focus on stamping parts processing factory, rich experience in the production and production of 20,000+ sets of stamping dies, product accuracy can reach 0.01MM, and monthly mold processing capacity of 100+ sets. Choose, choose to rest assured!