What are the material requirements for metal stamping parts processing? -Hardware

The materials used in stamping are closely related to the metal stamping parts. The nature of the metal stamping materials directly affects the quality and service life of the metal stamping parts, and may also affect the production cost. So what are the basic materials for the processing of metal stamping parts? What about the requirements? Let's take a look with the author below. The basic requirements of metal stamping processing for materials: 1. Good stamping and forming performance. For the forming process of metal stamping parts, such as stretching, bending, segmentation, convex hull, etc., the material should have good stamping and forming performance. It has good crack resistance, good moldability and shape setting, otherwise the product is prone to deformation, cracking, etc., which will cause difficulties in mold repair. For the separation process, the material is required to have a certain degree of plasticity. 2. With high surface quality The surface of the material should be smooth and flat, free of defects and damage, and the material with good surface quality, not easy to break during molding, not easy to scratch the mold, and the surface quality of the metal stamping parts is also good. 3. The thickness tolerance of the material should conform to the national standard. Because a certain mold gap is only suitable for materials with a certain thickness range, if the material thickness tolerance is too large, it will not only directly affect the quality of the part, but also may lead to the appearance of waste. In the process of correcting bending, shaping, etc., it is possible that the mold or the press may be damaged due to the excessive positive deviation of the thickness. Hardware, 15 years as a day, just to make every metal stamping part, the satisfaction of each customer is the ultimate goal. Hardware, located in Baoan, Dongguan, is committed to the production of precision metal stamping parts, with a daily output of 3 million stampings. , With complex shaped hardware samples in 2 days, shipment in 3 days, mold out in 4 days is your trustworthy choice Dongguan hardware, with 7 patents, fast sample delivery hardware stamping parts manufacturers can customize a variety of flat pads And stamping parts. , Dongguan Hardware, a hardware stamping parts manufacturer with 15 years of experience, complete equipment, one-stop service, with a daily output of 30 million stamping cycles, is an ideal choice for your hardware stamping parts manufacturer, if you need to know more, welcome to consult: company website: