What are the matters needing attention in the production of metal stamping parts?

What should be paid attention to in the production of metal stamping parts? Metal stamping parts are the products we usually come into contact with. It is made by cutting, bending, punching, forming and other processes of metal materials in the mold cavity through the pressure of the mold and the punching machine. So what should be paid attention to in the production of metal stamping parts? Next, I will explain to you: 1. Regularly check the die installation base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables. 2. Metal stamping parts should be strictly inspected before installation and use, dirt should be removed, and the guide sleeve and die of drawing stamping parts should be carefully checked for good lubrication. 3. In order to ensure the service life of the tension and compression parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the tension stamping parts. 4. When installing the mold, the stamping personnel should use soft metal manufacturing operation tools to prevent damage to the stamping parts when knocking and crushing during the installation process. 5. When the punch and die edges of the stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die. To prolong the service life of metal stamping parts, the following points must be done at first: 1. The service life of metal stamping parts is related to many factors, such as the steel used in the mold, mold structure design, heat treatment, surface treatment, machining and grinding, wire Cutting process, stamping equipment, stamping materials and stamping parts processing technology, mold lubrication, maintenance level, etc. 2. It should be conducive to use existing equipment, process equipment and process flow as much as possible to process it, and it is conducive to the extension of the service life of stamping parts. 3. It is necessary to meet product specifications and technical performance to facilitate assembly and maintenance. Technology is the guarantee of production, and this technology must be able to be quantified and directly executed. The process must be simple and easy to understand to ensure that the core technology is not lost! 4. Under the condition of ensuring normal use, try to make the dimensional accuracy level and surface roughness level requirements moderate, and it is conducive to product interchange, reducing waste, and ensuring stable product quality. 5. It is necessary to help improve the utilization rate of metal materials. It is strictly forbidden to over-complicated and over-simplified specifications of materials, and reduce material consumption as much as possible. Use low-cost materials where permitted, and make the parts as waste-free and waste-less as possible. 6. It needs to have a simple shape and a reasonable structure to simplify the mold structure and simplify the number of processes, that is, use fewer and simple stamping processes to complete the processing of the entire part, reduce processing by other methods, and facilitate the stamping operation and facilitate the organization and realization Mechanized and automated production to improve labor productivity. 7. The installed metal stamping parts should be maintained accordingly, and do not touch water to prevent rust and corrosion. In daily use, lightly close and open lightly to prevent hard closing and hard opening, which may cause damage. Not only does it push and pull without noise, it is smooth, lightweight, and has a long service life. The above-mentioned matters needing attention in the production of metal stamping parts are summarized here. The metal stamping manufacturer can quickly solve the time emergency problem of metal stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Any problems can be solved. Contact us.