What are the measures to prevent damage to metal stamping parts?

We living in the 21st century must not be unfamiliar with metal stamping parts. We can see them anytime and anywhere in our daily life. However, some metal stamping parts are easily damaged due to various reasons, so for these hardware What measures do we have to better prevent damage to the stamping parts? Measures to prevent the damage of Dongguan hardware stamping parts: 1. The model, specification and performance of the selected hardware accessories should meet the current national standards and relevant regulations, and be consistent with the selected plastic doors and windows match. 2. For sliding windows with a width of more than 1m, or double-glazed doors and windows, double pulleys or rolling pulleys should be installed. 3. The sliding support hinge shall not be made of aluminum alloy, but shall be made of stainless steel. 4. When installing metal stamping parts with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fasteners. It must not be fastened to plastic profiles, and non-metallic linings must not be used. 5. The hardware fittings should be installed after opening, and the door and window locks and handles should be assembled after the window and door leaf is put into the frame to ensure the correct position and flexible switching. 6, Dongguan hardware stamping parts should be maintained after installation to prevent rust and corrosion. In daily use, open and close lightly to prevent hard opening and hard closing, which may cause damage. Due to the poor quality of materials used in many metal stamping parts, backward production technology and low machining accuracy of machinery and equipment, this also directly affects the quality of metal stamping parts. Therefore, if you want to improve the quality of metal stamping parts, you must use high-quality materials, improve production technology and update machinery and equipment, so that higher quality metal stamping parts can be made, and the damage of precision metal stamping parts can be effectively prevented. Hardware, from the quality inspection of stamping parts processing raw materials, to mold design, processing, assembly, to the first product, mass production, is a one-to-one customized service to ensure that every small metal stamping part matches your product, 15 years of hardware Stamping experience, a processing team of more than 20 people, can produce samples in 2 days, and ship in 3 days. Can save your product listing time.