What are the precautions during the processing of computer gongs?

At present, many machining centers have introduced computer gong processing, because computer gong CNC lathes can process parts that ordinary machine tools cannot process or are difficult to process, with high processing accuracy, stable and reliable processing quality, and high degree of production automation. However, computer gong processing also needs to pay attention to some problems during the operation. The following metal stamping manufacturers will take you to understand what are the precautions in the computer gong processing process? Precautions in the computer gong processing process: 1. It is strictly forbidden to open the numerical control system privately. Watch and touch the control cabinet; 2. It is forbidden to touch the tool tip and iron filings by hand, and the iron filings must be cleaned with iron hooks or brushes; 3. It is forbidden to touch the rotating spindle, workpiece or other by hand or in any other way Moving parts; 4. On the machine control microcomputer, no other operations are allowed except for program operation and transmission and program copying; 5. It is strictly forbidden to slap the control panel or touch the display screen. It is strictly forbidden to knock on the worktable, indexing heads, fixtures and guide rails; 6. It is forbidden to measure the workpiece, manual speed change during processing, and not to wipe the workpiece with cotton silk, nor to clean the machine; 7. The operator is not allowed to change the internal parameters of the machine at will. Intern students are not allowed to call or modify other programs not compiled by themselves; 8. When processing parts, the protective door must be closed, head and hands are not allowed to enter the protective door, and the protective door is not allowed to be opened during processing; 9. CNC milling machine belongs to For large precision equipment, except for tooling and workpieces placed on the workbench, it is strictly forbidden to stack any tools, clamps, blades, measuring tools, workpieces and other sundries on the machine tool; 10. During the processing of the computer gong, the operator is not allowed to leave the machine tool without authorization and should be kept Thoughts are highly concentrated, observing the operating status of the machine tool. In the event of an abnormal phenomenon or accident, the program should be terminated immediately, the power supply should be cut off and the instructor should be reported in time, and other operations should not be carried out; what are the precautions during the computer gong processing process, share the above 10 points. Remember to always put safety in production to avoid unnecessary losses.