What are the prerequisites for precision stamping molds? Hardware tells you

The necessary conditions for precision stamping parts molds: 1. When the wear resistance of precision stamping parts mold blanks are plastically deformed in the mold cavity, they flow and slide along the surface of the cavity, causing violent friction between the surface of the cavity and the blanks. As a result, the mold fails due to wear. Therefore, the wear resistance of the material is one of the basic and important properties of the mold. Hardness is the main factor affecting wear resistance. In general, the higher the hardness of the mold parts, the smaller the amount of wear and the better the wear resistance. In addition, wear resistance is also related to the type, quantity, shape, size and distribution of carbides in the material. 2. The strength and toughness of precision stamping parts molds Most of the working conditions of the molds are very bad, and some of them are often subjected to relatively large impact loads, resulting in brittle fracture. In order to prevent sudden brittle fracture of mold parts during work, the mold must have high strength and toughness. The toughness of the mold mainly depends on the carbon content, grain size and organization state of the material. 3. Fatigue fracture performance of precision stamping parts molds. In the process of mold work, under the long-term action of cyclic stress, fatigue fractures are often caused. Its forms include low-energy multiple impact fatigue fracture, tensile fatigue fracture, contact fatigue fracture, and bending fatigue fracture. The fatigue fracture performance of the mold mainly depends on its strength, toughness, hardness, and the content of inclusions in the material. 4. High temperature performance of precision stamping parts molds When the working temperature of the mold is higher, the hardness and strength will decrease, leading to early wear of the mold or plastic deformation and failure. Therefore, the mold material should have high anti-tempering stability to ensure that the mold has high hardness and strength at the working temperature. 5. Heat and cold fatigue resistance of precision stamping parts molds. Some molds are in a state of repeated heating and cooling during the working process, which causes the surface of the cavity to be pulled and pressure to change stress, causing surface cracks and peeling, and increasing friction. Obstruct plastic deformation, reduce dimensional accuracy, and cause mold failure. Hot and cold fatigue is one of the main forms of failure of hot work molds. This type of mold should have high resistance to cold and heat fatigue. 6. Corrosion resistance of precision stamping parts molds When some molds such as plastic molds are working, due to the presence of elements such as chlorine and fluorine in the plastic, they will separate and resolve strong corrosive gases such as HCI and HF after heating, which will erode the surface of the mold cavity and increase Its surface roughness exacerbates wear failure.