What are the preventive measures in the production of metal stamping parts?

What are the preventive measures in the production of metal stamping parts? Metal stamping parts are products that we often use. They are processed by cutting, bending, stamping, and shaping metal materials in the cavity through the pressure of molds and punching machines. So what should be used in the production of metal stamping parts? Precaution? Next, the metal stamping manufacturer will explain to you: First, preventive measures during the production of metal stamping parts 1. Regularly check the punch turntable and the die mounting seat of the stamping part to ensure the coaxial accuracy of the upper and lower turntables. 2. Metal stamping parts need to be strictly inspected before installation and application. Dirt should be removed. The stamping parts guide sleeve and die-casting mold should be carefully checked for good lubrication. 3. In order to ensure the service life of stretched and compressed parts, the spring of the mold should also be replaced regularly to prevent the fatigue damage of the spring from affecting the use of stretched stampings. 4. When installing the mold, the stamping personnel should use soft metal manufacturing tools to prevent the stamping parts from being damaged by impact and extrusion during the installation process. 5. The wear of the convex and concave die edge of the stamping parts should be stopped in time and polished in time, otherwise it will rapidly expand the wear level of the die edge, accelerate the wear of the die, and reduce the quality of stamping and die life. Second, the main measures for stamping processing plants to prevent metal stamping waste 1. Stamping raw materials must meet the specified technical conditions (strictly check the specifications and grades of the raw materials, and if possible, the dimensional accuracy and surface quality requirements are high. The workpiece is subject to laboratory inspection. 2. The various links specified in the stamping process specifications should be fully and strictly observed; 3. The presses and stamping dies and other tooling equipment used should be guaranteed to work under normal working conditions; 4 Established a strict inspection system during the production process. The first stamping parts must be fully inspected and can be put into production after the inspection is qualified. At the same time, the inspection should be strengthened to deal with accidents in time; 5. Adhere to the civilized production system, such as stamping parts The transfer of the blanks and blanks must be done with suitable workstations, otherwise it will crush and scratch the surface of the workpiece and affect the surface quality of the stamping parts; 6. During the stamping process, ensure that the mold cavity is clean and the workplace must be tidy. The workpieces after the orderly processing should be placed neatly. The above-mentioned preventive measures during the production of metal stamping parts are summarized here, including the phenomenon of preventing metal stamping waste from appearing during our daily stamping processing, and we need to do daily routines maintenance work.