What are the principles of process design for metal stamping parts processing

Metal stamping products have been widely used in all walks of life. In the production and processing of stamping products, metal stamping parts must be produced according to product skills, material utilization, shape, and dimensional accuracy. In stamping production, the production of metal stamping parts Manufacturability occupies a very important position. Therefore, when designing stamping parts, the following design principles should be followed according to the manufacturability of the product; metal stamping parts must meet the use and technical performance of the product to facilitate assembly and repair; metal stamping parts must be shaped Simple, reasonable structure, complete the processing of the entire part with the simplest stamping process, try not to use other methods to process separately, to facilitate the stamping processing operation and reduce labor as the principle; under the condition of ensuring that the metal stamping parts can be used normally, try your best Make the dimensional accuracy level and surface roughness level of the stamping parts lower; the forming and accuracy of the metal stamping parts are related to the precision and structure of the mold, so the prerequisite for the production of high-quality metal stamping products is to design the stamping die. Metal stamping parts should be processed as much as possible with existing equipment and technological processes, which is conducive to the service life of the die; article recommendation: the principle of selection of the structure of stamping parts The first article: Evaluation criteria for defects in metal stamping parts (1)