What are the processes of Changzhou metal stamping parts and stamping die finishing + 15 years of experience

The hardware technicians of the manufacturer responsible for the production of metal stamping parts in Changzhou said that the so-called precision machining of mechanical parts is to ensure the higher accuracy of mechanical parts, and it also puts forward higher requirements on the enterprise. The completion of mechanical parts finishing is equivalent to improving For the accuracy of mechanical parts, the production quality and economic benefits have been improved from the side. The finishing using stamping dies needs to be carried out in strict accordance with the corresponding processing procedures, and attention should be paid to the stability of the processing. The finishing of stamping dies includes four processing procedures. The following Xiaoshuo will take a look at the specific content: 1) Production: The main platform of stamping processing is the workbench, where the concave and convex molds are controlled to determine the stamping that the mechanical parts can withstand. In this way, it can prevent the stamping from being too large or too small, resulting in lower machining accuracy of the parts, losing the meaning of processing, and avoiding the parts from being punched out of the worktable during the stamping process. 2) Positioning: Positioning is the key to controlling the progress of parts. If there is a deviation, not only the processing accuracy will be reduced, but the stability of the operation cannot be guaranteed. Therefore, when performing stamping processing, precise positioning is required, considering the structure of the stamping die, stamping stability, operation control and other aspects, and reasonably positioning the finished parts. 3) Guidance: The guiding structure link is mainly to plan the upper and lower stamping routes to ensure that the concave and convex molds meet the standard requirements during the processing of the stamping die. The guide post is a more commonly used guide device in stamping die processing, which can not only play a fixed role, but also ensure that the guide post will not be damaged during finishing. 4) Fixation: For stamping mold processing, there are many parts that need to be fixed, including: screws, nuts, springs, each part needs to be fixed well, and the integrity and stability of the parts must be checked before stamping the mold. checking. This is because the stamping process of the stamping die itself is very large. Once the workpiece is not fixed well, it will lead to the development of offset and have a very serious impact on the processing accuracy. Therefore, the fixation is a more important link. Hardware, 15 years of focus on Changzhou metal stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy up to 0.01 mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!