What are the production planning and design standards for analyzing metal stamping parts?

What are the production planning and design standards for analyzing metal stamping parts? In the metal stamping parts processing and production process, in order to ensure the orderly production of the production work, ensure the quality of the products, and reduce the product defect rate, it is necessary to plan the metal stamping parts production work and formulate design standards, then the specific metal stamping parts production plan And what is the design standard will be explained to you next. First, the planning of metal stamping production: 1. A strict inspection system must be established during production. The first piece of metal stamping parts produced daily must be fully inspected and can only be put into production after passing the inspection. It is necessary to strengthen inspections, and deal with it in a timely manner if accidents occur. 2. During the stamping process, the mold cavity must be kept clean, and the orderly processed workpieces in the workplace must be placed neatly. 3. Adhere to a civilized production system. For example, the transfer of metal stamping parts and accessories must use appropriate workstations, otherwise the surface of the workpiece will be crushed and scratched and the surface quality of the workpiece will be affected. Second, hardware stamping design standards: 1. When designing hardware stamping parts, it should be ensured that under normal use, the dimensional accuracy and surface roughness requirements should be as low as possible, and it should be beneficial to the metal stamping parts. The exchange of products can reduce waste and ensure the stability of the quality of metal stamping parts. 2. When designing metal stamping parts, the existing equipment, process equipment and procedures should be used as much as possible to process the metal stamping parts, and at the same time, it should be helpful to extend the service life of the stamping die. 3. The designed stamping parts must be beneficial to improve the utilization rate of metal materials, reduce the types and specifications of materials, and reduce the consumption of materials as much as possible; use low-cost materials when allowed, and make the parts as waste-free and as possible. Less waste arbitration. 4. The design of metal stamping parts must meet the use and technical performance of industry products, and be easy to assemble and facilitate maintenance. 5. The design of metal stamping parts should be reasonable in structure and simple in shape, which is conducive to simplifying the structure of the mold and simplifying the number of processes. That is, the processing of the entire part is completed with the least and simplest stamping process, reducing the use of other methods to process, and is conducive to The stamping operation facilitates the organization of mechanized and automated production to improve labor productivity. The above production planning and design standards for metal stamping parts are summarized here. The designed precision stamping parts are conducive to improving the utilization rate of metal materials, reducing material varieties and specifications, and reducing material consumption as much as possible. I hope that the above will help everyone help.