What are the reasons and solutions for mold jams in the processing of precision stamping parts? 'Hardware'

Mold is an indispensable important equipment for precision stamping parts processing. During the processing process, if you encounter mold stamping defects, you need to analyze the principle in time, and propose effective solutions to deal with the problem in order to avoid greater failures. Reduce production costs and ensure smooth production. In the process of precision stamping parts processing, mold jamming is a common problem. The following hardware authors introduce the causes and solutions of mold jamming in precision stamping parts processing. 1. Improper adjustment of the feeding distance, material pressing and loosening of the feeder. Solution: recheck and adjust. 2. The delivery distance changes during production. Solution: readjust. 3. Die stamping is abnormal and sickle bend is caused. Solution: Remove the sickle bend of the material belt. 4. Insufficient hole diameter of guide material, upper die pulls material. Solution: Study the punching and guiding hole convex and concave molds. 5. The stripping function of the guide plate is set improperly, and the strip is attached. Solution: Modify the guide material and prevent the material from being attached to the belt. 6, the bending or tearing and cutting position is not smooth up and down. Solution: adjust the force of the stripping spring, etc. 7. The material is curved, the width is out of tolerance, and the burrs are large. Solution: Replace the material and control the quality of the feed. 8. The material is thin and warps during feeding. Solution: add up and down presses between the feeder and the mold, and add up and down extrusion switches. 9. Improper erection of the mold and large deviation from the verticality of the feeder. Solution: re-erect the mold. The above content is about the causes and solutions of mold jams in the processing of precision stamping parts. I hope to help you. In the processing of precision stamping parts, the mold has an important impact on the final molding quality of the product. Therefore, once the mold has a bad problem, it should be resolved in time.