What are the reasons for poor forming of precision stamping parts? 'Hardware'

When you are processing its precision stamping parts, the phenomenon of turning over and distorting may occur. There are many reasons for this phenomenon. Let the hardware author give you a detailed introduction! If the precision stamping parts are processed by the instructor during the blanking, the material is turned and twisted. Then you need to study the cutting edge, and also need to pay attention to check whether the blanking gap is reasonable. If it is caused by the instability of the stamping part when it is bent, then you need to deal with its U-shaped V-shaped bending. To deal with the problem, it is the guiding position of the stamping parts before bending, and the guiding position during the bending process is caused by slippage. If your precision stamping parts are turned over, twisted and deformed, resulting in poor forming, then you need to solve the problem by punching and unloading. According to a study, 60% to 70% of the world's steel materials are plates, and most of them are stamped into finished products. So you can fully imagine how extensive the application of precision stamping parts processing is.