What are the specifications for the processing of metal stamping parts?

What are the specifications for the processing of metal stamping parts? Dongguan Hardware has focused on the customization and wholesale of high-precision products for 15 years. We also have certain insights on the specifications for metal stamping parts processing. Let’s take a look at it together: 1. Establish a strict production process In the inspection system, the first piece of stamping parts must be fully inspected, and can only be put into production after the inspection is qualified. At the same time, the inspection should be strengthened to deal with the accident in time. 2. Adhere to a civilized production system. For example, the transfer of workpieces and blanks must use appropriate workstations, otherwise the surface of the workpiece will be crushed and scratched and the surface quality of the workpiece will be affected. 3. During the stamping process, the mold cavity should be kept clean, and the orderly processed workpieces in the workplace should be placed neatly. 4. The raw materials must be in compliance with the specified technical conditions (strictly check the specifications and grades of the raw materials, and if possible, perform laboratory inspections on the workpieces with high dimensional accuracy and surface quality requirements. 5. For each specified in the process regulations The link should be fully and strictly followed. Sixth, the stamping equipment used must be guaranteed to run normally without abnormal conditions. Dongguan Hardware Co., Ltd. has been dedicated to precision metal stamping molds, precision metal stamping, and precision mold processing for 15 years. Yes A manufacturer specializing in the design, manufacture and customization of precision metal molds. If you are interested in our metal stamping parts, please contact us:.