What are the structure of Wuhan metal stamping parts and stamping dies? More than 20 mold design engineers

The mold master of the hardware manufacturer responsible for the manufacture of hardware stamping parts in Wuhan said that the structure of the stamping die, the structure of the punching die, and the die structure are similar. According to different product characteristics and needs, corresponding molds are designed. Different mold structures have different functions. , The products produced are also different. Generally speaking, there are simple and complex. But no matter how complex the structure is, its basic structure remains the same, nothing more than a number of templates, blocks and standard parts. The following Xiaoshuo takes everyone to understand: 　　 Molds are generally assembled from a number of templates and parts (we call them block, or block) and standard parts. The general stamping die structure, the specific template from top to bottom (including the code number) is: 　　The template of the upper mold includes: 　　 upper pallet, upper foot, upper mold base (UPU), upper backing board (UBU), upper splint ( PHU) Stop baffle (PPS), stripping board (PSU); 　　 lower mold templates are: 　　 lower template (DIE), lower backing plate (LBD), lower mold base (LPD), lower foot, lower pallet; 　　 others The less commonly used templates: 　　 upper cover plate (CVU), knockout plate, upper template, lower stripper plate, bottom stop baffle, lower splint, male mold, female mold, etc.; 　　 some mold parts include: 　　 upper mold entry Sub, block: plywood block, stripper block, punch, etc.; 　　 lower mold block, block: lower mold block, lower mold knife edge, etc.; 　　 standard parts: spring, hexagonal screw, stop screw, thread Springs, contour sleeves, guide posts, guide sleeves, contour gaskets, dual-purpose pins, ejector pins, etc.; 　　non-standard parts: external positioning, internal positioning, pitch positioning, external limiting column, internal limiting column Wait. Hardware, 15 years of focus on Wuhan hardware stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy up to 0.01 mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!