One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
The metal stamping factory is here today to share with you the technical requirements of various electrical plug precision shrapnels, the radius of the bending part of the electrical plug shrapnel, and most of the springs need to be bent when forming. If the radius of curvature of the curved part is relatively small, these parts will have a lot of stress. Therefore, if you want to avoid large stress in the bending part, the bending radius should be at least five times the thickness of the plate. Let's take a look at it in detail below. The stress is concentrated at the notch or hole of the shrapnel of the electrical plug. There are often stepped parts and openings in the spring sheet, and stress concentration will occur at the step where the size changes sharply. The smaller the hole diameter, the larger the plate width, the greater the stress concentration factor. Tolerances on the shape and size of the shrapnel of electrical plugs, the springs are mostly processed by stamping. In the design, the shape and size of the suitable precision metal stamping should be considered. At the same time, the springback during the bending process and the heat treatment of the spring should be fully considered. Dimensional tolerances such as deformation. In summary, we can understand the technical requirements and hardware of precision shrapnel for various electrical plugs. 15 years of ingenuity has focused on precision metal shrapnel stamping, silk-like precision + 16 strict quality inspections, and the concept of the result of your needs as the result of the work. You choose, choose to rest assured
Contact Person: Steven Yan
Whatsapp: +86 15916928704
Wechat: CITY-STOP
Phone: +0086 159 1692 8704
E-MAIL: ym@syjwj.com.cn
One-stop manufacturer for all kind of stamping products and CNC lathed products.