What are the types of electronic stamping parts?

Electronic stamping parts drawing circular drawing processing: the drawing of round flange products, the bottom of the flange is flat, the side wall is axisymmetric, and the deformation is evenly distributed on the same circumference, and the blank on the flange is drawn Deformation; Rectangular stretch processing is a low-rectangular piece that is stretched at one time. The tensile resistance at the rounded corners of the flange deformation area is greater than the tensile force outside the straight edge, and the deformation at the rounded corner is greater than the deformation at the straight edge; Deep-drawn parts processing: the extreme drawing processing products beyond deep drawing processing need to pass more than two times of repeated drawing to complete, and the products processed through the depth direction of the front station can be re-drawn in the depth direction; Reverse stretch processing: Reverse stretch of the workpiece that has been stretched in the previous process can increase the radial tensile stress. It will have a better effect on preventing wrinkles, and it may also increase the coefficient of re-stretching. Pay attention to maintenance after installation of electronic stamping parts to avoid rust and corrosion. In daily use, lightly close and open lightly to avoid hard closing and hard opening, which may cause damage. Without noise, there are now nylon wheels. Not only does it push and pull without noise, but it is also smoother, lighter, and has a service life that is not shorter than the above various pulleys. To make (doors) and windows operate normally and smoothly, it is necessary to choose high-quality pulleys for (doors) and windows. On the surface, inferior pulleys have rough workmanship. There is no lubrication. Sliding is not sensitive and light. Hardware springs are classified into hardware stamping parts and electronic hardware materials. It is made of stainless steel or manganese after heat treatment. It is an integral part of the switch. With the help of the conductivity of the metal shrapnel, it can play an excellent role as a switch between the operator and the product. At the same time, using the stable resilience of the pancake and the long lifespan, it provides the operator with an excellent tactile response. In the production of electronic stamping parts, in order to meet the needs of different stamping operations, various types of presses are selected. There are many types of presses. According to different transmission methods, they can be divided into two categories: mechanical pressure and hydraulic press. Among them, mechanical presses are widely used in stamping production. With the development of modern stamping technology, high-speed presses and CNC rotary head presses are increasingly being used.