What are the types of processing defects of scaffold stamping parts?

In the process of processing and manufacturing scaffold stamping parts, the procedures can be broken down into two major links, namely the separation process and the deformation process. Under normal circumstances, most of the deformation problems in the separation process appear in the cut area, mainly shear deformation, and there will also be a certain degree of tearing and other problems. In any case, its main purpose is to separate the sheets. And if there is an overall deformation problem, then we can attribute it to a defect in the scaffold stamping product, or the deformation is too large, causing it to become a waste product. Let's take a look at the specific content together. First of all, let's understand what the defects of the separation process include: fracture defects, excessive roughness, flash and burrs, oversize, inaccurate position, and shape defects. If there is a mistake in the process of deformation, what defects will happen to the scaffolding stamping parts? The main content includes: 1. The shape of the part does not meet the requirements, such as uneven surface, unclear edges, wrinkles, distortion, bulging of the surface, lack of meat, etc.; 2. Unqualified size of the part, such as between geometric bodies The location is unqualified; 3. The surface quality is unqualified, such as napping, orange peel and slip lines, etc.; 4. Partial fractures and cracks. Of course, there are still some quality problems in the production process of scaffold stamping parts, which mainly include the following factors: 1. Unreasonable part design; 2. Unreasonable process design; 3. Unreasonable mold design and manufacturing; 4. There is an error between the installation of the bed and the mold; 5. The structure and composition of the raw material, and its own attributes, etc.; 6. The quality of the blank, such as shape, size, and fracture. In addition, the issues that need to be considered include whether the lubrication of the scaffolding stamping parts is appropriate, whether the workers are professional in operating skills, and whether the coordination and cooperation between each station and each process is improper. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections