What can be done to improve the quality of metal stamping parts?

First of all, we must first understand the production principle of metal stamping parts is to use punches and molds to deform or break stainless steel, iron, aluminum, copper and other plates and other materials. From here we can see that the stamping process plays a huge role in the production process of the product. The following author briefly introduces the methods to improve the metal stamping process: 1. When designing the structural shape of the metal stamping parts, it is better to use a simple and reasonable surface and its combination. At the same time, the number of processed surfaces should be as small as possible And the processing area is smaller. 2. The materials used for metal stamping parts should not only meet the technical requirements of product design, but also meet the requirements of the stamping process and the processing requirements of cutting, electroplating, cleaning and other processes after stamping. 3. Requirements for metal stamping performance. For the forming process, in order to facilitate the stamping deformation and the improvement of the quality of the parts, the material should have good plasticity, a small yield ratio, a large thickness directivity coefficient, and a small planar directivity coefficient. The ratio of the yield strength of the material to the modulus of elasticity is small. For the separation process, the material does not need to have good plasticity, but it should have a certain degree of plasticity. The better the plasticity, the more difficult it is to separate. If you want to know more ways to improve the metal stamping process, please call the consultation hotline: