What causes poor forming of precision stamping parts?

When you are processing its precision stamping parts, the phenomenon of material turning and distortion may occur. There are many reasons for this phenomenon. Let us introduce you in detail! If the precision stamping parts are processed by the instructor during the blanking, the material is turned and twisted. Then you need to study the cutting edge, and also need to pay attention to check whether the blanking gap is reasonable. If it is caused by the instability of the stamping part when it is bent, then you need to deal with its U-shaped V-shaped bending. To deal with the problem, it is caused by the sliding of the guiding position of the pressing piece before the bending, and the guiding position during the bending process. If your precision stamping parts are turned over, twisted and deformed, resulting in poor forming, then you need to solve the problem by punching and unloading. According to a study, 60% to 70% of the world's steel materials are plates, and most of them are stamped into finished products. So you can fully imagine how extensive the application of stamping and machining is. Dongguan Hardware Co., Ltd. has been dedicated to precision metal stamping molds, precision stamping parts, metal stamping parts, stamping parts processing and other fields with 15 years of ingenuity. After more than ten years of development, it has a complete set of high-precision equipment and technical team as well as sound scientific management in the precision metal stamping industry. It has a monthly processing capacity of 100 sets of precision molds and a daily production capacity of 3 million strokes.