What conditions should be satisfied with precision stamping lathes? 'Hardware'

What conditions should be satisfied with precision stamping lathes? 1. For the types of precision stamping products, have you used high-speed precision punching machines before? These problems can allow us press manufacturers to analyze faster to know whether it is appropriate to use what type of press. 2. What type of precision stamping materials are? Is it a metallic material or a non-metallic material, what is the thickness of the material? High-speed precision punching machines all need to stamp metal materials, and the thickness of the material is generally within 3 mm. If the material does not meet the requirements, it is probably not suitable for use. 3. Is the material produced by precision stamping coiled? Is the width of the material too large? The stamping and feeding process requires automatic feeding by the feeder, and manual feeding is not supported. Therefore, the material is not suitable for coils or too wide. 4. What is the requirement for precision stamping times per minute? Some companies may not require a high punching speed, but high-speed precision punches are generally at 200-800 per minute, so we do not recommend using them if they are less than 150 times. 5. Demand for the tonnage of high-speed precision punches. If you clarify the tonnage you want, it is better to consult and communicate with the punch manufacturer, and you can provide detailed drawings and samples for calculation.