What is the reason for the jam in the production of metal stamping parts? + 3 million punches each time and the next day's production capacity

Metal stamping parts In production, stamping dies will cause jams due to many factors. What causes this phenomenon? Xiaoshuo sorted out a few reasons and solutions, and shared them with you: 1. Improper adjustment of feeding distance, material pressing, and relaxation of the feeder. Solution: recheck and adjust. 2. Die stamping is abnormal and sickle bend is caused. Solution: Remove the sickle bend of the material belt. 3. Insufficient hole of guide material, upper die pulls material. Solution: Study the punching and guiding hole convex and concave molds. 4. The stripping function of the guide plate is set improperly, and the strip is attached. Solution: Modify the guide material and prevent the material from being attached to the belt. 5. The bending or tearing position is not smooth. Solution: adjust the force of the stripping spring, etc. 6. The material is curved, the width is out of tolerance, and the burrs are large. Solution: Replace the material and control the quality of the feed. Hardware, 15 years of focus on metal stamping parts, 5000 square meters workshop, hundreds of precision processing production equipment. Monthly processing capacity of 100+ sets of molds, more than 20 Ru0026D and design engineers, and a daily production capacity of 3 million strokes It can quickly solve the time-critical problem of metal stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose rest assured!