What is the reason for the processing of precision metal stamping parts that causes the scrap to rebound?

In the processing of precision metal stamping parts, in the process of blanking, it will encounter the phenomenon of scrap rebound, resulting in poor production, efficiency lag, and cost increase. So what caused the scrap rebound? Xiaoshuo will analyze with you: 1. The sharpness of the cutting edge. The larger the rounded corner of the cutting edge, the easier it is to cause the scrap to rebound. 2. The modulus of the mold. When each station die is stamped, the requirement of the modulus is certain, and the modulus is small, which easily causes the scrap to rebound. 3. Whether the gap of the mold is reasonable. Unreasonable mold clearance can easily cause scrap to rebound. 4. Whether there is oil stain on the surface of the processed plate. Hardware, 15 years of craftsmanship focused on precision metal stamping parts processing, 20,000+ sets of customized mold experience, monthly 100+ sets of mold processing, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!