What is the term 'stamping elbow' in a stamping factory?

I must have heard of the term 'stamping elbow' in a stamping factory for the first time. It is a bit silly. It makes sense to say that every line is like a mountain. In fact, a very simple 'stamping elbow' is a ring-shaped elbow that is stamped from a sheet with a stamping die, called a stamping elbow. The forming process of the stamping elbow is complicated, and it needs to be welded according to different materials and uses, and gradually formed under a certain pressure. The forming of the stamping elbow needs to be carried out in accordance with certain procedures and strictly abide by the corresponding process, otherwise the produced stamping elbow will have quality problems. According to needs, a circular ring shell can be cut into 4 90 ° elbows or 6 60 ° elbows or other specifications of elbows. This process is suitable for manufacturing any elbow with a ratio of the pitch diameter to the inner diameter of the elbow greater than 1.5D. Large push elbow with specifications is an ideal method for manufacturing large push elbow. This process forming method is used in the production of different elbows, and shows good use value in different fields, so that the process has a good value in the production of different elbows. Hardware, fifteen years of stamping experience, have handled various types of product stamping and processing, rich experience, efficient production, and bring you a quick and comfortable service experience. support hotline: