What principles should be followed for bending stamping parts

Bending stamping parts are also common in metal stamping parts, but stamping parts manufacturers are also required to have sufficient experience to be able to produce customer-satisfied products while improving production efficiency and effectively reducing the scrap rate. Next, the author will explain to you what principles should be followed for bending stamping parts. 1. Bend the inside of the product first, and then the outside of the product. 2. Fold small bends first, then large bends. 3. Fold the complicated bend first, and then the relatively simple bend. 4. The first bending can not affect the subsequent processing. After installing the four principles and designing the bending sequence, check whether the following requirements can be met: 1. Whether the R angle at the bending position is reasonable. 2. After the previous process is completed, check whether the mold in the next process is affected. 3. After the previous process is completed, check whether there is a positioning line in the next process. [Related recommendation] Learn more: Continuous improvement and innovation are the key factors for the survival of a stamping company. Learn more: Stamping processing. Is slow-moving wire more accurate than fast-moving wire? Learn more: What are the positioning benchmarks for stamping processing?