what reason? Let 98% of people know the bad factors in the production of metal stamping parts

Metal stamping parts can be seen everywhere in our lives, but when the metal stamping parts are processed, the size of the metal stamping parts may be poor. Why is this? The following metal stamping manufacturers briefly analyze. The reasons for the poor size of the metal stamping parts are as follows: 1. The metal stamping parts die is defective during assembly, which causes the dimensions after stamping to be inconsistent with the drawings. 2. The mold of the metal stamping parts frame is not placed in the correct position, and the gap between the molds causes the size to be poor. 3. The positioning of the metal stamping parts mold is loose, and the stamping parts are poor due to offset 4. The author summarized some factors that lead to poor size of small metal stamping parts, I hope it will be helpful to everyone. Hardware, from quality inspection of raw materials for metal stamping parts, to mold design, processing, assembly, to the first product, mass production, is a one-to-one customized service to ensure that every small metal stamping part matches your product, 15 years Hardware stamping experience, a processing team of more than 20 people, can produce samples in 2 days, and ship in 3 days. Can save your product listing time.