What should be paid attention to in the production of metal stamping parts?

Metal stamping parts generally require high accuracy, which also places higher requirements on suppliers. However, not all metal stamping parts factories can meet high-precision standards. Points to note in the production of metal stamping parts 1. Regularly check the punch turntable and the die mounting base of the stamping parts to ensure the coaxial accuracy of the upper and lower turntables. 2. Metal stamping parts should be strictly inspected before installation and use, dirt should be removed, and the guide sleeve and die of drawing stamping parts should be carefully checked for good lubrication. 3. In order to ensure the service life of the tension and compression parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the tension stamping parts. 4. When installing the mold, the stamping personnel should use soft metal manufacturing operation tools to prevent damage to the stamping parts when knocking and crushing during the installation process. 5. When the punch and die edges of the stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die. 6. According to the installation procedure of the mold, install the convex and concave molds on the turntable to ensure that the direction of the convex and concave drawing stampings is consistent, especially the stampings with direction requirements should be carefully installed to prevent incorrect installation and reverse installation. Hardware, a company with a development team of 20 people, a complete production process, and a company that quickly packs and ships the materials after they are OK, and a hardware stamping parts manufacturer with 15 years of experience. Your rest assured choice, hotline: