One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
What should I pay attention to during the use of stamping dies?
With the development of society and technology, the demand for stamping parts is increasing, and the requirements are also for excellence. The correct use, maintenance and maintenance of molds are links that cannot be ignored in the production of metal stamping parts. Next, let us briefly discuss the things that metal stamping parts manufacturers need to pay attention to during the production and use of stamping dies. 1. Regularly check the turntable of the punch press and the mold installation base to ensure the coaxial accuracy of the upper and lower turntables. 2. Before the installation and use of the stamping and drawing parts, strict inspection should be required, and the dirt should be cleaned, and the guide sleeve and the mold of the drawing and stamping parts should be carefully checked for good lubrication. 3. In order to ensure the service life of the drawing stamping parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the drawing stamping parts. 4. When installing the mold, the stamping personnel should use softer metals (such as copper, aluminum, etc.) to make operating tools to prevent damage to the drawing stampings when knocking or smashing during the installation process. 5. When the punch and die cutting edges of drawing stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die cutting edge, accelerate the wear of the die, and reduce the quality and life of the die. 6. Install the convex and concave molds on the turntable according to the installation procedure of the mold to ensure that the direction of the convex and concave drawing stamping parts is consistent, especially the drawing stamping parts with direction requirements (non-circular and square). ,Anti-loaded. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)