What to do if the feeding of the stamping parts manufacturer is not smooth-hardware

The workshop production scene of the stamping parts manufacturer is that metal materials are placed on the rack, and the step distance of the feeder is the same as that of the die. Each time the stamping machine rotates, the metal material is sent forward one step forward. If the feeding is not smooth, what causes it? Xiaoshuo shares several points with you: (1) The mold is not set up correctly, which causes the material belt to be not in the same straight line with the feeder and the mold re-frame mold or adjust the feeder. (2) The material belt is not flat, adjust the leveling machine or replace the material ( 3) Non-discharging causes feeding irregularities. Refer to non-discharging solutions. (4) Positioning is too tight. Adjust positioning (5) Guide pin is too tight or straight wall is too long. Adjust guide pin (6) Punch is not fixed well or If the length is too long and the material belt interferes, replace the punch with the proper length and fix it again. (7) The ejector pin is too short and the material belt interferes with the formed block. Adjust the length of the ejector pin to avoid interference. (8) Improper adjustment of the position of the floating block Choosing the appropriate stamping parts manufacturer for the position of the floating block can solve the difficulties in our work from the source. Hardware, 15 years of rich experience, 5,000 square meters production workshop, 3 million punching next-day production capacity, 16 quality inspection procedures are strictly controlled. Solve your time-critical problems, solve your batch delivery problems, and solve your stamping parts quality problems.