What to do if the surface of scaffold stamping parts is corroded

I don’t know if my friends have discovered that we can see scaffolding stampings in many construction occasions. It can be said that the current scope of use of this product is quite extensive. However, no matter what kind of structure the scaffold stamping parts are used as components, we need to pay attention to it in use, and we should pay attention to the correct storage method when storing it to avoid corrosion. So, when we encounter such a problem, how should we deal with it? In fact, we have certain requirements regarding the use of scaffolding stampings. For example, the corrosion depth of the product surface and the degree of bending deformation must be within the allowable range of national regulations before it can be used. Moreover, rust inspection should be maintained once a year. When checking, be sure to select three products from the severely corroded products, and then check the corrosion. If it exceeds the specified value, it can no longer be used. The reason for this requirement is that once the scaffolding stamping parts are corroded, their performance will decrease and become more fragile, especially when the metal material is rusted, it will be very fragile. In this case, when it is used, it will bring us a great constant and negative impact. Therefore, in our daily work, we must take some measures to avoid this problem as much as possible, and do a good job of inspection. If it is found that it cannot be used, it must be replaced in time. In addition, we also need to remind all users and friends that when we use scaffolding stamping parts, it is not allowed to punch holes on the surface, nor smash or scratch the steel pipe. Those who say bad things about me during construction should be handled with care and no littering is allowed. When stacking, they should be placed neatly, and certain anti-rust measures should be taken. Finally, one aspect we need to pay attention to is that in daily work, we must pay attention to that when the bolt tightening torque reaches 65N.m, the scaffolding stampings should still maintain good performance and must not be damaged. Related news: The characteristics of the main materials of stamping parts, the handling of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections