Where are the flat washers and spring washers used?

There are often novices in the industry that are not clear about the respective uses of flat washers and spring washers, so today we will introduce what are the differences between the two in use. Spring washers are used in general mechanical products. It is widely used in force and non-force-bearing structures, and is characterized by low cost, convenient installation, and suitable for parts with frequent assembly and disassembly. 1. The use of spring washers Generally speaking, the use of spring washers is to require resistance between parts and parts to prevent the nut from falling off. Nuts are needed. Its function is to make the nut and its bolts closer together. One point is to strengthen the friction between the two. Generally speaking, the use of spring washers does not require the use of flat washers, but there are some places where the surface of the firmware is relatively high, and flat washers are still needed for protection. Second, what is the function of the flat gasket Generally speaking, the material of the flat gasket is relatively soft, but in order to make the contact area larger, the pressure can be better dispersed, so it will be relatively better than the previous one. The harder one is because the softer texture is easily damaged. The function of leveling is: 1. Increase the contact area between the machine and the nut. 2. The surface damage caused by the spring washer to the machine can be reduced to a lower level. Of course, the order of arrangement should be that the spring is in front of the flat washer. The flat pad is attached to the surface of the machine to increase the force-receiving area of u200bu200bthe screw a bit, while the left and right springs are used to prevent loosening and relieve some pressure. 3. When the diameter of the part is relatively large, if the use of the flat pad is reduced, it is easy to cause damage to the part, and the screw is also prone to instability, especially some machines have high workloads and require flat pads. Assisted. I hope that after reading this article today, more novices can understand the difference between a flat washer and a spring, and what is the connection between a flat washer and a spring washer. Dongguan Hardware Co., Ltd. looks forward to your cooperation! !