Why are there jams in the production of metal stamping parts? +15 years of manufacturers and you analyze the reasons and solutions

In the production of metal stamping parts, stamping dies will cause jams due to many factors. What causes this phenomenon? Xiaoshuo sorted out several reasons and solutions, and shared them with you: 1. Improper adjustments of feeder distance, material pressing, and relaxation. Solution: recheck and adjust. 2. Die stamping is abnormal and sickle bend is caused. Solution: Eliminate the sickle bend of the material belt. 3. Insufficient hole diameter of the material guide, the upper die pulls the material. Solution: Study the punching and guiding hole convex and concave molds. 4. The stripping function of the guide plate is set improperly, and the strip is attached. Solution: Modify the guide material and prevent the material from being attached to the belt. 5. The bending or tearing position is not smooth. Solution: adjust the force of the stripping spring, etc. 6. The material is curved, the width is out of tolerance, and the burrs are large. Solution: Replace the material and control the quality of the feed. Hardware, 15 years of focus on metal stamping parts, 5000 square meters workshop, hundreds of precision processing production equipment. Monthly processing capacity of 100+ sets of molds, more than 20 Ru0026D and design engineers, and a daily production capacity of 3 million strokes. It can quickly solve the time-critical problem of metal stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!