Why do metal stamping parts appear to be twisted

Metal stamping parts In the progressive die, the shape of the stamping part is formed by punching the remaining material around the stamping part. The main reason for the turning and distortion of stamping parts is the influence of punching force. When punching, due to the existence of the punching gap, the material is stretched on one side of the die (the material is warped upward), and compressed on the side of the male die. When using the unloading plate, use the unloading plate to compress the material to prevent the material on the die side from warping upwards. At this time, the force of the material changes accordingly. As the discharge plate increases its pressing force, the material on the punch side is stretched (compression force tends to decrease), while the material on the concave die surface is compressed (tension force tends to decrease). The overturning of the stamping part is caused by the stretching of the material on the die surface. Therefore, when punching, pressing and compressing the material is the key point to prevent the punching from turning over and twisting. Hardware, 15 years of ingenuity, focus on precision metal stamping parts, silk-like precision + 16 strict quality inspections, and the concept of the result of your needs as the result of the work, let you choose, and choose to rest assured!