Wuxi Xishan Hardware Stamping Parts Factory, stamping common problems + 20 mold design engineers

The metal stamping parts are exquisite in craftsmanship and versatile in use, but there are also many problems in their production. The technicians of Wuxi Xishan Hardware Stamping Parts Factory have analyzed several major problems. Xiaoshuo has compiled some information and will share with you below. Click: 1. Adhesion, scratches: defects on the surface of the part or mold due to the friction between the material and the punch or die; 2. Burrs: mainly occur between the cutting die and the blanking die. Large or small gaps will produce burrs; 3. Line deviation: When the part is formed, the part that first contacts the mold is squeezed and formed a line; 4. Concave and concave: foreign matter (iron filings, rubber, dust on the uncoiling line) ) Convex and concave caused by mixing; 5. Torturous: due to uneven stress, poor drawbead matching or poor control of the press slider, twists and strains occur at the corner or embossed part of the product; 6. Wrinkles: due to slippage of the press Poor block adjustment, low press precision, improper adjustment of air cushion pressure, large punch or r-parts, etc. cause wrinkles on the edges or r-parts. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, more than 20 mold Ru0026D and design engineers, 5000 square meters workshop, hundreds of precision machining production equipment, 3 million punching next-day production capacity, 20000+ sets of stamping die customized production experience, stamping The precision of machining parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!