Zhejiang metal stamping parts manufacturer, stamping processing method + 15 years of striving for perfection stamping experience

The technical staff of Zhejiang hardware stamping parts manufacturer said that there are two methods of cold stamping and hot stamping according to the temperature conditions during stamping. This depends on the strength, plasticity, thickness, degree of deformation, and equipment capabilities of the material, and the original heat treatment state and use conditions of the material should be considered. The following Xiaoshuo will take you to understand the relevant knowledge: 1. The processing of cold stamping metal at room temperature is generally suitable for blanks with a thickness of less than 4mm. The advantages are no heating, no scale, good surface quality, convenient operation and low cost. The disadvantage is that there is work hardening, which makes the metal lose its ability to deform further in severe cases. Cold stamping requires that the blank has a uniform thickness and a small fluctuation range, with a smooth surface, no spots, and no scratches. 2. Hot stamping is a stamping method in which metal is heated to a certain temperature range. The advantage is that it can remove the internal stress, avoid work hardening, increase the plasticity of the material, reduce the deformation resistance, and reduce the power consumption of the equipment. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20,000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm , The raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!