Zhongshan metal stamping processing plant, what is the stamping process requirement + 3 million punching next day production capacity

The production staff in charge of the hardware stamping processing plant in Zhongshan City said that there are several technological requirements for metal stamping parts. The following Xiaoshuo sorted out some related content and let everyone take a look: 1. The structure and shape of the hardware stamping parts are designed At the same time, the surface and combination of simple and reasonable structure should be adopted, and the number of processed surfaces and the processing area should be minimized as much as possible. 2. Choose a reasonable method of blank preparation in mechanical manufacturing, which can directly use profile, casting, forging, stamping and welding. The selection of the blank is related to the specific production technical conditions, and generally depends on the production batch, material properties and processing possibilities. 3. The requirements of metal stamping forming performance, in order to facilitate stamping deformation and the improvement of the quality of the parts, the material should have good plasticity, small yield ratio, large plate thickness directivity coefficient, small plate directivity coefficient, and material yield The ratio of strength to elastic modulus is small. The separation process does not require a material with good plasticity, but a material with a certain degree of plasticity. 4. Specify appropriate manufacturing accuracy and surface roughness. The cost of metal stamping parts will increase with the improvement of accuracy, especially in the case of high accuracy, this increase is extremely significant. Therefore, high accuracy should not be pursued when there is no sufficient basis. Similarly, the surface roughness of metal stamping parts should also be appropriately specified according to the actual needs of the mating surface. Hardware, 15 years of focus on the metal stamping processing plant in Zhongshan City, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy Up to 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!