Blog

When the stamping die is processed, sometimes the problem of template cracking occurs. This is a relatively common situation. So what is the cause of the template cracking? After asking our technical staff, the editor will give you a brief introduction below a bit.

The application and defense of copper washers are extremely extensive, and the preloading loads required by the copper washers are also different. For example, the copper spacers used for the thin flange of low-pressure water pumps require low pressing loads, which are suitable for national defense, electric power, machinery, petroleum, chemical industry, metallurgy , papermaking, shipping, transportation and other fields of the national economy, the product specifications are complete, the qual

The two matching connectors have the difference between a male seat and a female seat. One side of the plug (the protruding connector) is the male terminal, and the side of the jack (the concave connector) is the female terminal.
Connector. Also known as connectors, plugs and sockets in China. Generally refers to electrical connectors, photovoltaic (pv) terminal. That is, a device that connects two active devices, carrying current or a signal

1. It can process continuous and smooth free-form surfaces that cannot be processed by ordinary three-axis CNC machine tools or that are difficult to complete in one clamping.
Blades of aero-engines and steam turbines, propellers for ships, and many shells and molds with special curved surfaces and complex cavities, holes, etc., such as machining with ordinary three-axis CNC machine tools, because their tools are relative to the workpiece The pose angle cannot be changed during the machining pr

The development of auto parts stamping parts industry is basically driven by the domestic auto market. In recent years, the development of the automotive market has been relatively slow, so the development of the automotive stamping parts industry is also relatively difficult. Next, let's take a look at the current development of China's automotive stamping parts industry.

Stamping factories will have various problems when producing stamping parts, resulting in waste of cost, reduction in production efficiency and so on. Therefore, we need to understand the causes of these problems and conduct analysis and verification to avoid problems. This article will introduce the reasons and solutions for the offset of bending stamping parts during the bending process.

There are many materials for stamping parts, and the quality of the materials determines the quality of the finished stamping parts. Metal stamping factories should pay enough attention to the selection of materials, and they must do a good job in quality control from the source. So, what's the point of choosing stamping materials? Don't worry, Dongguan Fortuna will tell you next.

Stainless steel stamping parts are a kind of metal stamping parts, which are widely used and very common in daily life. Before the metal stamping factory produces stamping parts, it needs to know the main application scope of the stamping parts, so as to have a targeted and good marketing work. Next, the editor of Dongguan Fortuna will introduce the main application fields of stainless steel stamping parts.

Precision stamping parts are parts processed by stamping, bending, stretching and other means, and the stamping precision is high. It is widely used in various industries, and in order to meet the requirements of use, the quality control of stamping parts is also more stringent. So what principles should the stamping factory pay attention to when processing metal stamping parts? The following Dongguan Fortuna will give you a brief introduction.

The application of stamping parts is very extensive, involving all aspects of life. When stamping parts are processed by stamping factories, burrs of stamping parts are often found. So, how to remove the burrs of stamping parts? Next, the editor of Dongguan Fortuna will introduce to you how to remove the burrs of stamping parts.

In the production process of metal stamping parts, the gap between the die and the punch of the stamping die needs to be accurate and reasonable, otherwise it will have various adverse effects on the stamping process, such as affecting the life of the die, the impact on the quality of the section, and the impact on the stamping process. The effect of dimensional accuracy and so on. Next, the editor of Dongguan Fortuna will analyze the common methods and characteristics of the gap adjustment of m

The processing technology of stamping parts mainly includes punching, bending and stretching. These processes are widely used and involve all aspects of our daily life. A good stamping process can achieve the purpose of saving materials, improving mold life, product quality and production efficiency. Next, the editor of Dongguan Fortuna will introduce these three processes.