Blog

Cleaning is an indispensable process in the production of metal stamping parts. This article will briefly introduce two common methods of quickly cleaning hardware parts. Of course, these knowledge points are well understood by metal stamping parts processing manufacturers, and there are also suitable methods for choosing their own.

In stamping processing, shearing is a process that is often used. For metal stamping plants, the reasonable choice of shearing equipment is very important. The size and precision of the stamped parts to be cut vary according to customer requirements and cutting equipment. Next, the editor of Yiwei Precision will introduce you to the different ways of cutting stamping parts.

When stamping parts processing plants produce and process metal stamping parts, there are often some problems that affect the quality of the products. For example, if the stamping parts are torn and skewed, what is the reason for this? After consulting the technical staff of Yiwei Precision, the editor concluded the following main reasons.

The shape and size of stamping parts are realized by stamping dies. The accuracy of the die determines the accuracy of the stamping parts. Therefore, the stamping die is particularly important. It will be a huge advantage for stamping factories to have independent mold research and development capabilities. There are many types of stamping dies, and their functions are different. Today, we mainly introduce the lower-level advanced die. Next, the editor of Dongguan Fortuna Metals will introduce t

Copper is pure copper, also known as C1100 and T2, which is the elemental substance of copper, named for its purple-red color. Copper is industrial pure copper with a melting point of 1083°C, no allotropic transformation, and a relative density of 8.9, five times that of magnesium. The mass of the same volume is about 15% heavier than ordinary steel. Because of its rose-red color, it turns purple after an oxide film is formed on the surface, so it is generally called red copper. It is copper con

The surface quality of copper busbars can be divided into three main aspects: surface cleanness, surface flattness and surface defects, which are inseparable from copper properties, production process, production management and production environment.

Copper busbar is an indispensable conductive material for the manufacture of motor windings, high and low voltage electrical appliances, switch contacts, and wires for power supply and distribution installations.

Stamping parts are widely used, including automotive, electronics, medical and other industries. Today, we mainly introduce automotive stamping parts. Generally speaking, the requirements of automobile stamping parts are higher. For stamping plants, if they cannot meet customer requirements, they are likely to lose customers. Next, Dongguan Fortuna will introduce the processing technology of automobile stamping parts to you.

With the continuous advancement of technology and the continuous development of the automotive and electronic industries, the corresponding requirements for precision are also getting higher and higher. Then when choosing a metal stamping factory, I believe you are looking forward to finding a manufacturer that can cooperate with you for a long time. Below, Dongguan Fortuna will show you how to find a manufacturer with better quality when choosing a metal stamping parts processing factory.