Blog

CNC lathe parts&cnc machined parts are widely used in electronics, household appliances, and automobiles. Compared with stamped parts, the product has higher precision and higher concentricity and roughness requirements. In Dongguan Fortuna Metals Co., Ltd.(CNC machined parts manufacturer), the machining diameter of CNC parts is 1.0mm-25mm, and the processing precision can reach 0.005mm. Now we possess 35 sets of Japanese- imported 5 axis CNC lathes.

Patrial Au plated male terminals ( Dia 0.7mm) and Partial Au plated female terminals ( Dia 1.15mm).

At Dongguan Fortuna Metals Co., Ltd., we have been pursuing technological innovation and efficiency improvement. These two connector terminals we developed this year have a very small diameter and the entire product is nickel plated. In order to save plating costs, single-sided gold plating is used in the functional area to increase the conductivity of the product. The product roundness toleran

The main advantages of metal stamping are as follows:
1. Stamping is an efficient production method. It uses a compound die, especially a multi-station progressive die, which can complete multiple stamping processes on a single press to achieve from unwinding, leveling, punching to forming and finishing of the tape. Fully automated production. High production efficiency, good labor conditions, low production cost, generally can produce hundreds of pieces per minute.

Today I will share some information about fine blanking. In general, we will classify fine blanking as a waste-free process, which is a process method that adds a blanking after ordinary blanking to achieve a high-precision, high-quality cross-section.

Metal spring clip is usually made of stainless steel or manganese with heat treatment, which is an important part of electronic switch. The spring-clip play an important role in a high-quality switch between the operator and the products. At the same time, the performance of stable resilience and long life, will provide good touch feedback to the operator.

What's the most important and decisive factor for choosing tooling steel?

Forming method–can choose from two kinds of basic material

A) Hot-working tool steel, it can afford high temperature during casting, forging and extrusive.

B) Cold working tool steel, usually used for blanking, shearing, cold forming, cold extrusive, cold forge and powder pressure molding.

Are You Doing These Movements To Damage The Mold？
Never maintenance stamping mold according to the maintenance plan.
Never use a lubricant on stamping die.
Never use the molds’ protecting device.
Die shut height was set incorrectly.

With the increase in global raw material costs and labor costs, it is especially important to provide customers with a feasible solution to reduce parts costs while providing high quality and services.

Due to the rapid development of the global metal processing industry, and at the same time because of the continuous increase in global labor costs. It is necessary to make improvements and innovations in technology and quality.
In order to meet the mass production needs of some zero-defect products, our company introduced customized automatic product selection machines this year to meet the appearance, size and performance testing of metal stamping parts and CNC machined products.