Metal stamping parts processing, problems and solutions when stamping thick plates

In the processing of metal stamping parts, some thick plate stamping parts are often encountered. Due to the characteristics of stamping processing, it is difficult to meet the accuracy requirements for thick plates. Xiaoshuo sorts out a few points and understands with you: 1. The punching surface is rough or even uneven. The size and shape accuracy of the punching parts are low, and the blanking has obvious arch and bending deformation. The low quality of stamping parts seriously affects the popularization and application of this process. How to improve the quality of thick plate stampings is a key issue to be discussed urgently. 2. The die life is low, especially for punching hard steel or thick sheets, the die life is lower. This hinders the promotion of this process. 3. There are still some problems to be further explored in the process, such as: the pre-processing and preparation of raw materials, including leveling, blanking and spheroidizing annealing treatment, cleaning, lubrication, and the preparation of strips, sheets, and blocks. For general factories, restricted by equipment conditions, coupled with immature technology, there will be some difficulties. 4. The determination of stamping process and die structure design and manufacturing, including material selection and heat treatment of die working parts, are still to be explored. 5. The research on the theory of thick plate stamping technology has not yet been put on the agenda. For example, effective measures to improve the quality of thick plate blanking, reduce the pressure of thick plate blanking, reduce the noise of thick plate punching, and popularize thick plate thermo-clean blanking technology, etc., all need to be studied specifically to guide factory practice. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, punching accuracy up to 0.01mm, 16 quality inspection layers are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!