Stainless steel flat washers, tempered for the car quality escort +15 years of ingenuity and focus on manufacturers

Stainless steel flat washers and stamping dies will experience varying degrees of wear after a certain quantity is produced. Xiaoshuo sorted out a few points, and let’s understand with you how flat washer molds can better improve the quality of mold use: 1. Correctly choose stamping die materials Different stamping die materials have different strength, toughness and wear resistance. Using better materials under certain conditions can increase durability several times. Therefore, it is necessary to select good materials in order to improve the durability of the stamping die. 2. Reasonable forging and heat treatment of stamping die parts. While selecting excellent stamping die materials, reasonable forging and heat treatment are required for materials of the same material and different properties, which is one of the main ways to improve the durability of stamping dies. For example, during quenching, if overheating is produced during heating, not only will the work piece become too brittle, but it will also easily cause deformation and cracking during cooling, which will reduce the durability. Therefore, when manufacturing stamping dies, the heat treatment process must be reasonably mastered. 3. Reasonably arrange the stamping die manufacturing process and ensure the processing accuracy. The stamping die processing accuracy has a great influence on the durability of the stamping die. For example, due to the uneven assembly gap in the punching die, the die will often be broken under the action of shearing force and affect the life of the punching die. At the same time, the surface finish of the stamping die is too low, which will also reduce the durability of the stamping die. Therefore, it is necessary to pay full attention to the size of the hole spacing, the perpendicularity of the punch to the fixed plate supporting surface during assembly, the uniform spacing of the stamping die, and the guiding accuracy level of the guide sleeve and the guide post during processing. The higher the manufacturing and assembly accuracy and the higher the surface roughness of the working part, the higher the durability of the stamping die. Hardware, 15 years of craftsmanship focused on stainless steel flat washers, 5000 square meters production workshop, hundreds of precision processing production equipment, 20000+ sets of precision stamping die customized production experience, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality Strictly check every layer of inspection. It can quickly solve the urgent problem of flat washer time, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!