Stainless steel metal stamping parts processing plant, material requirements + materials imported and national standard original factory

The stainless steel metal stamping parts processing plant has talked about the surface and internal properties of the stamping sheet material, which has a great influence on the quality of the stamped product. So what are the requirements for stamping materials? Xiaoshuo compiled some information and brought you to understand: ①The thickness is accurate and uniform. The stamping die is precise and has a small gap. If the thickness of the sheet is too large, the deformation force will be increased, and the material will be jammed, and the die will even be swelled. If the sheet is too thin, it will affect the quality of the finished product and even crack during deep drawing. ②The surface is smooth, no spots, no scars, no scratches, no surface cracks, etc. All surface defects will remain on the surface of the finished workpiece, and the crack defects may extend deep and wide in the process of bending, deep drawing, forming, etc., resulting in waste products. ③The yield strength is uniform without obvious directionality. Anisotropy (see plastic deformation in the drawing, flanging, bulging and other stamping processes, due to the occurrence of all-directional yielding, the inconsistent amount of plastic deformation will cause uneven deformation and inaccurate forming. Inferior product or scrap. ④High uniform elongation. In the tensile test, the elongation before the neck phenomenon of the sample begins to be called uniform elongation. During deep drawing, the deformation of any area of u200bu200bthe sheet cannot exceed the uniformity of the material Extend the range, otherwise uneven deformation will occur. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, top 500 corporate partners, more than 20 mold Ru0026D and design engineers, 5000 square meters workshop, hundreds of precision processing production equipment, The next-day production capacity of 3 million punches, 20,000+ sets of customized stamping die production experience, the raw materials are imported and the original national standard, the precision of stamping parts can reach 0.01mm. It can quickly solve the time emergency problem for you, solve the stamping accuracy problem, and solve the production Quality issues. Choose, choose to rest assured!