Stamping hardware factory, being honest and trustworthy + responsible for the results u003d doing yourself well [hardware]

At a stamping hardware factory, Xiaoshuo has always believed that it is not only the scale, but also the maturity of technology. It is the crystallization of scale, processing capacity, technology and company culture. Fang is the core competitiveness of a stamping hardware factory in today's society. In 17 years, Mr. Liu from Wuhan had some products exported to the United States. Both the appearance and accuracy of stamping parts, including various inspections of raw materials, were very strict. Four colleagues from Mr. Shan Liu’s company came to the Xiaoshuo factory to check the quality documents and sat in the conference room for a whole day. The molds and prototypes were carried out according to the schedule discussed with Mr. Liu. However, after the sample finished product of Mr. Liu’s company was assembled in the United States, one of the 20 machines had insufficient punching shrapnel, which caused the use of this machine to be unsuitable. very stable. From the moment the email was received, Director Liang and several colleagues in the engineering department analyzed the cause. From the inspection of the accuracy, size, craftsmanship, material, etc. of this stamping shrapnel, more than 40 hours later, accurate results were obtained. This shrapnel made of domestically produced 410 grade stainless steel has some differences with the composition of American 410 in the composition of several metal elements, which results in some differences in hardness during quenching, which causes the shrapnel to work. There is a difference in the elasticity of the time. Therefore, immediately update the material and determine the standard immediately. All the work was completed in one week. Then try to produce 100 sets again, pass all the test data, and send it to Mr. Liu's company to install the machine and confirm it to the customer again. Thanks to people’s efforts, both Mr. Liu and the American customers have obtained satisfactory results, and Mr. Liu has signed a project cooperation with an American customer of up to 100 million yuan in this project. Hardware, 15 years of focus on stamping hardware factory, 5000 square meters production workshop, hundreds of precision processing production equipment, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 strict quality The inspection layer is strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, let you choose peace of mind, peace of mind, rest assured!