Stamping parts manufacturer, what factors affect the quality + Xiaoshuo sorting tells you [hardware]

In the production process, stamping parts manufacturers often encounter some problems about poor quality. It affects time, efficiency, and cost. In serious cases, it may be returned by the customer. And what aspects should be taken to improve the overall quality of stamping parts? Xiaoshuo sorted out a few points to share with you: 1. Raw materials If the factory does not strictly control the quality of materials, and even uses scraps to produce products, stamping parts cannot meet the high-precision requirements, and there will be problems of non-compliance. 2. Stamping die The die is a tool to ensure the shape and dimensional accuracy of the stamping parts. Its design and manufacturing level is closely related to the quality of the precision stamping parts. The stamping dies produced by non-focused mold factories, although the appearance does not seem to be problematic and can be used normally, but the production efficiency, accuracy, and life span will be greatly reduced, and they are not at the same level as those produced by dedicated mold factories. on. 3. Transportation During transportation, the product must be packaged well. And some manufacturers directly use the woven bag to pack it randomly, so that the product will inevitably be scratched on the road. 4. Procedure In the process of stamping parts processing, if the material is not fed according to the correct method, or the material is not fed according to the correct frequency, it will cause the product quality to be unqualified. If you want to produce qualified stamping parts, you must not only choose high-quality materials and molds, but also ensure that you follow the procedures during the operation to avoid errors. Moreover, the enterprise must have a complete management system in order to produce qualified stamping parts. Hardware, 15 years of focus on stamping parts production plant, 5000 square meters production workshop, hundreds of precision processing production equipment, more than 20 R u0026 D design engineers. The monthly processing capacity of 100+ sets of molds, the daily production capacity of 3 million punching times, the stamping accuracy can reach 0.01mm, and the 16 quality inspections are strictly controlled. It can quickly solve the urgent problems of stamping parts, solve the stamping accuracy problems, and solve the production quality problems for you. Choose, choose to rest assured!